Page 17 of 39
4. OPERATIONS
4.1 Button Controller Module
This unit of controller is built-in with Honeywell temperature and humidity sensor to monitor indoor
temperature and humidity in real time. The controller comes with physical buttons for functional
and easy operation. The controller provides functions to control the machine On/Off, Humidity
Setting, Fresh Air Valve On/Off, Adjust Fan Speed (depending on models and available fan settings)
and many other functions. Please read the manual carefully before operation.
1. On/Off button
2. Mode switching button
3. Fresh air valve on/off button
4. Operation setting button
5. Time setting button
6. UV light sterilization
7. Anions purification button
8. Up value button
9. Down value button
To Next Page
Loading...
