Dascom Tally 1325 - Interface and Advanced Setup Parameters

Tally Dascom 1325
23
Interface Setup
Interface
Setup
Valid Settings Function
Interface
Auto, Parallel, USB
For multi-host connection. Auto: First come first served;
Parallel/USB: Serves the designated host only.
I-PRIME
Yes, No
Yes: Host I-Prime signal resets the printer.
Auto IF
Delay
10s, 30s
Determines the waiting time before receiving data from another
interface.
RAM Usage
User Font, Buffer
User Font: Part of RAM is used for user download characters;
Buffer: Disables user character download function; uses RAM for
expanded buffer size up to 92KB.
Advanced Setup
Advanced Setup Valid Settings Function
Auto Load
Manual, 0.5s, 1s, 1.5s, 2s
Specifies the waiting time before loading a cut
sheet automatically. Manual: Auto load mode is
off. (Applies to friction mode only)
Paper Jam
Prevention
Yes, No
Flattens paper edges by carriage movement
before printing starts.
Paper End Detect
Yes, No
Yes: Detects paper out and halts printing;
otherwise, ignores paper out and continues
printing.
Form Length Ctrl
Software, Ignore
Ignore: Ignores form length commands.
Pitch Ctrl
Software, Ignore
Ignore: Ignores CPI commands.
Font Ctrl
Software, Ignore
Ignore: Ignores font select commands.
Quality Ctrl
Software, Ignore
Ignore: Ignores print quality commands.
Buzzer
Yes, No
Yes: Sounds buzzer on all hardware errors.