Data Aire DAP III - Analog Module Status (Read Only-Optional); Analog Module Control (Read;Write - Optional); Analog Module Configuration (Read Only-Optional)

Object Identifier Type Description Units
selection. See Section 2.5 for
specific alarm codes.
1.3.6.1.4.1.22731.1.2.3.8.0 OCTET STRING
Each octet represents one alarm
selection. See Section 2.5 for
specific alarm codes.
Alarm Relay 3 Settings
N/A
1.3.6.1.4.1.22731.1.2.3.9.0 OCTET STRING
Each octet represents one alarm
selection. See Section 2.5 for
specific alarm codes.
Alarm Relay 4 Settings
N/A
7.11 Analog Module Status (Read Only-Optional)
Note: all the objects in this section are optional. They require an Analog module to be installed
onto the DAP III panel and optional analog transducers or transmitters required.
Refer to the DAP III O&M manual for Analog Module configuration and programming.
Object Identifier Type Description Units
1.3.6.1.4.1.22731.1.2.4.1.0 INTEGER
not installed(0)
installed(non-zero)
Analog Module Installed
N/A
1.3.6.1.4.1.22731.1.2.4.2.0 INTEGER
Analog Sensor 1 Value
N/A
1.3.6.1.4.1.22731.1.2.4.3.0 INTEGER
Analog Sensor 2 Value
N/A
1.3.6.1.4.1.22731.1.2.4.4.0 INTEGER
Analog Sensor 3 Value
N/A
1.3.6.1.4.1.22731.1.2.4.5.0 INTEGER
Analog Sensor 4 Value
N/A
1.3.6.1.4.1.22731.1.2.4.6.0 INTEGER
Analog Output 1 Value
N/A
1.3.6.1.4.1.22731.1.2.4.7.0 INTEGER
Analog Output 2 Value
N/A
1.3.6.1.4.1.22731.1.2.4.51 INTEGER
Current Fan Airflow
CFM
7.12 Analog Module control (Read/Write – Optional)
Object Identifier Type Description Units
1.3.6.1.4.1.22731.1.2.4.34 INTEGER
Fan Speed Override
%
1.3.6.1.4.1.22731.1.2.4.50 INTEGER
Fan Airflow Override
CFM
1.3.6.1.4.1.22731.1.2.4.52 INTEGER
Zone Airflow Override
CFM
7.13 Analog Module Configuration (Read Only-Optional)
Note: all the objects in this section are optional. They require an Analog module to be installed
onto the DAP III panel and optional analog transducers or transmitters required.
Object Identifier Type Description Units
1.3.6.1.4.1.22731.1.2.4.8.0 INTEGER
not-installed(1)
input-voltage-a-b(2)
input-voltage-a-c(3)
input-voltage-b-c(4)
output-voltage-a-b(5)
output-voltage-a-c(6)
output-voltage-b-c(7)
input-current-a(8)
input-current-b(9)
Analog Sensor 1 Name
N/A
Document 600-000-615
16