Data Aire DAP III - DAP III Unit Types

2.3 Network Wiring
2.3.1 For the Ethernet connection, Use the CAT-5 Ethernet cable. The DAP III panel should be
connected to the same network with the monitoring PC or BMS. See figure 3 for details.
Each unit requires having a dedicated IP address. Consult with the building IT personnel
or building network administrator on IP addressing.
Figure 2: DAP III Display Board With an Ethernet Communications Network Card
Communication Header J1
RJ-45 Connector with Link and Activity LED
N
etwork switch or hub
(Supplied by others)
Ethernet connection to BMS
Ethernet Communication Card
BMS computer
DAP III Display board of unit #1
with Ethernet card (Supplied by
Data Aire.)
DAP III Display board of unit #2
with Ethernet card (Supplied by
Data Aire.)
Figure 3: Network wiring
Document 600-000-615
4