Data Aire gForce Ultra - 8.1.5 Changing the Service Level Password; 8.2 Entering Menu Settings

56
7.5.1 Local Control for Charging
• Press the “Hand on” button. The display will show Hand Local Running.
• Use the  and  keys to move the cursor to the desired digit position, then use the and  keys
to increase or decrease the desired RPM setting. As you change the value, the compressor will
increase or decrease in speed.
• See example display below:
When done charging, press the “Auto on” key to return to normal operation controlled by the
dap4™ controller.