10-2014 gForce User Manual ● 31
WARNING:
Do not leave the unit in manual override. Slide the switches
to the OFF position when completing testing and/or start-up. An alarm will
be activated if units are left in the ON position.
3.13 Wiring Diagrams
Every Data Aire evaporator, condenser, condensing unit or fluid cooler comes with a
wiring diagram. These diagrams are ladder type schematics intended for service
personnel. The intent is to allow the technician to understand the wiring details
associated with the electrical components and how they interface with the controls as
well as peripheral equipment (including secondary heat exchangers).
The wiring diagram in the evaporator will indicate field interface terminals to the
secondary heat exchanger. The internal wiring of the secondary heat exchanger is
found on a separate diagram which can be found on the inside cover of the heat
exchanger electrical box. Both diagram types are also placed inside the
shipping/warranty packet secured in the evaporator section.
To Next Page
Loading...
