Data Aire GUGU 070 - Local Control for Charging with VFD

10-2014 gForce User Manual ● 51
7.5.1 Local Control for Charging
 Press the “Hand on” button. The display will show Hand Local Running.
 Use the  and  keys to move the cursor to the desired digit position, then use
the and  keys to increase or decrease the desired RPM setting. As you
change the value, the compressor will increase or decrease in speed.
 See example display below:
When done charging, press the “Auto on” key to return to normal operation
controlled by the dap4™ controller.