10-2014 gForce User Manual ● 99
The following screen will be displayed (values are for reference only):
8.2.12 Menu L – Configure I/O
Menu L is for setting the control to the type equipment and options ordered. This
requires the Factory Level password and entry should be limited to Data Aire factory
and service personnel.
See the dap4™ Operation Manual for details – available on the Data Aire website
(dataaire.com).
8.2.13 Zone Master
The gForce Ultra units with optional Zone Master control will be shipped with a
supplemental manual detailing programming and individual screens on the dap4™
controller.
8.3 Secondary Heat Exchangers
Most of the controls on remote condensers, condensing units and fluid coolers consist
of basic electromechanical type components. Secondary heat exchangers have a
separate User Manual which gives complete details on adjusting thermostat settings,
etc.
To Next Page
Loading...
