10-2014 gForce User Manual ● 75
Move the cursor to the title block by pressing the ENTER key stepping through all the
inputs. To return to the main Menu press the ESC key or to view the following screen
press the DOWN key.
The following screen will be displayed (values are for reference only):
Press the ENTER key to return to the main Menu.
Press the DOWN key to advance to Menu J – Factory Settings
8.2.10 Menu J – Factory Settings
Menu J is for setting the control to the type equipment and options ordered. This
requires the Factory Level password and entry should be limited to Data Aire
factory and service personnel.
To Next Page
Loading...
