Data Aire idap - System Monitoring and Control; Set Date and Time; Change User Name and Password

13
D. Set Date and Time
Theidapcarddoesnothaveabuilt-intimeclock,itsdateandtimearesynchronizedwiththedap4
controller. The default idap card has been programmed to synchronize with the dap4 controller time
clockeveryminute.Donottrytochangethetimeclocksynchronizersettings.Changingtimeclock
synchronizationsettingswill causetimeclockand eventloggingerrors.Tochangethedate and
time,gotodap4menuC-ClockandScheduler.Toviewtheclocksynchronizersetting,clickon
“DataandGraphs”theclickon“Clock”tab.Thefollowingscreenwillappear:
E. Changing User Name and Password
Tochangeusernameandpassword,clickon“Password”inthe“Conguration”pagethenclickon
“ChangeUserNameandPassword.”Thefollowingscreenwillappear:
Clickon“admin”,thefollowingscreenwilldisplay: