Data Aire idap - View Alarm Message

To Next Page

To Previous Page

System status will display:

• Currenttemperatureandhumiditysetpoint

• Currenttemperatureandhumiditydeadband

• Currentreturnairtemperatureandhumidity

• Alarmstatus

• SystemON/OFFcurrentoperation:fan,coolingstages(DXunitonly),heating,humidica-

tion,dehumidication,chilledwatervalveopening(Chilledwaterunitonly),ECfanrunning

speedpercentage(gForceunitonly).

• Equipmentruntimes

• Optionaldischargetemperatureandoptionalchilledwatertemperature

Discharge temperature and chilled water temperature will not show if an optional discharge tem-

perature or optional chilled water temperature sensor is not installed.

Tip: Ifyoumonitorseveralunits,youcanbookmarkunitsandassignthenamestothemonthe

webbrowserforaquickaccess.

B. View Alarm Message.

If the system detects an alarm, the Alarm box on the system status screen will turn red and display

”Yes”.Clickthe“View”buttonnexttothealarmbox.