Data Aire idap - idap Software Version; Change Setpoints and Deadbands

19
F. idap Software Version
Tondtheidapcardsoftwareandrmwareversion,simplyclick“Conguration”tabfromthemenu
ontheleft,thenclickonthe“Utilities”tabfromthemenuacrossthetopofthepage.
Consultwithfactoryifsoftwareorrmwareupgradeareneeded.
G. Change Setpoints and Deadbands
Tomodifythesystemtemperature,humiditysetpointanddeadband,simplyclickonthe“Change”
buttonnexttotheRelativehumiditysetpointanddeadbandonthesystemstatuspage.Thefol-
lowingwindowwillappear,enternewsetpointordeadbandthenclick“Submit.”