Data Aire idap - System On;Off Control

20
Asetpointchangeconrmwindowwillappear,click“OK”toconrmthechange.
The new setpoint or deadband will show on the system status screen.
H. System On/Off Control
Important Note: The system ON is the default setting, to turn the system OFF, the web
browser must be always active during the OFF mode control period and communicate with
the idap card. In other words, idap web page must be active otherwise the system will revert
toONmodeifthewebpageinterfaceisinactive.
ToturnthesystemOFF,simplyclick“Change”buttonnexttothesystemONbox,selectOFFthen
click“Submit”\,”thefollowingwarningwindowwillappear:
ClickOK,thesystemwillturnOFFandthesystemON/OFFstatusboxwillshowOFFmessagein
redbackground.