Data Aire idap - Configure Unit Information

8
9. Restartthedap4toreboottheidapcardandwaitforaboutoneminuteforthedap4andidap
card to complete their reboot process.
10. Connect to idap card using the new IP address. Ping the idap card IP address to verify the
connection.
III. Congure idap Card on Start-up
After establishing the Ethernet connection to the card, open a web browser such as Internet Ex-
plorer(Version10ornewer),MozillaFirefoxorGoogleChrometobrowsethecard.Clickon“Goto
AdministrationArea.”Thefollowingscreenwillappear:
Enter factory default user name admin and factory default password fadminthenclickLogIn.
The System status page will appear with data.
A. Program Location, Unit name, Model and Cooling Type.
Click“Conguration”ontheleftsidetaskbarofthepage,andthenselect“General.”Thefollowing
screen will appear: