Page 15 of 19
Datacard Group Confidential
Q: Are two different printheads needed to support color printing and monochrome
printing?
A: No, a single printhead produces excellent print results for both color and monochrome printed
cards.
Q: Can the CD800 CLM be used as a standalone laminator?
A: No, the CD800 CLM must be attached to a CD800 duplex printer in order to work.
Q: What are the power requirements?
A: The CD800 CLM printer requires 100-240V, 50/60 Hz.
Q. Can the CD800 CLM laminate without printing?
A: Yes.
Q. Can the CD800 CLM create a tactile impression without printing or laminating?
A: Yes.
SUPPLIES
Q: Is DuraShield overlay a laminate patch?
A: No, DuraShield clear overlay is a coated polyester film that provides true edge-to-edge
protection for ID-1 card substrates.
Q: Can DuraShield overlay be used with non PVC composite cards?
A: PVC Composite cards are recommended to improve aesthetics and avoid card warping and
flash.
Q: Can DuraShield overlay be used with a chip card?
A: No, DuraShield cannot be used with a chip card.
Q: Can DuraShield overlay be used with non “T” panel supplies?
A: No, DuraShield clear overlay has been formulated and tested to work with our patented
Datacard supplies with “T” panel only.
Q: Is there an option for a custom impression?
A: Yes. We will have guidelines available to help design a custom impression available on
PartnerPage
SM
under the corresponding supply section.
Q: How do I order a custom impression?
A: Please refer to the Datacard
®
Certified Supplies Custom Impression Order Form on
PartnerPage
SM
.
Q: Will there be an origination fee for a custom impression?
A: Yes. Please refer to your Price Books on PartnerPage
SM
.
Q: What is the lead time for a custom impression?
A: The generic impressions will be stocked and available for shipment. Custom impression lead
times are approximately 6-8 weeks after design approval and receipt of order.
To Next Page
Loading...
Need help?
General
