DataCard LM200 - The Left and Right Sides of the Laminator

8 Introduction
The Left and Right Sides of the Laminator
PowerSwitch Presstheswitchtopoweronthelaminator.
ExhaustFan Dischargesheatfrominsidethelaminator.
IntakeFan Drawsairintothelaminatorforinternalcooling.
PortforCableLock Attachanoptionalcablelockinthislocation.
PowerReceptacle Pluginthepowercordhere.
CardOutlet Cardsexitthelaminatorhere.
CardStackerAttachmentSlots Attachthe
cardstackerhere.Ascardsexitthelaminator,
theycollectinthecardstacker.
FilterCover Removetoaccesstheairintakefilter.
LiftArea Usethisareatoliftthelaminatorwhencarryingit.
CardInlet Printedcardsenterthelaminatorhere.
InfraredPort Sendsorreceivesdataviainfraredcommunicationtothe
cardprinter.