SR200 & SR300 Card Printers and LM200 & LM300 Laminators Userโs Guide 61
IPv4 DHCP
๏ฌ๏ ON
๏ฌ๏ OFF
Dynamic๎Host๎Configuration๎Protocol๎(DHCP)๎is๎a๎
network๎feature๎that๎assigns๎IP๎addresses๎to๎devices๎on๎
the๎network:
๏ฌ๏ ON๎uses๎DHCP๎to๎assign๎the๎printer๎IP๎address.๎The๎
IP๎address๎can๎change๎when๎you๎power๎off๎the๎
printer๎and๎then๎power๎it๎on๎again.
๏ฌ๏ OFF๎means๎that๎you๎must๎assign๎the๎IP๎address๎of๎
the๎printer๎and๎it๎will๎not๎change๎(static๎IP).๎Use๎this๎
setting๎if๎your๎network๎does๎not๎support๎DHCP.
Ask๎your๎network๎administrator๎which๎setting๎to๎use.
Setting:
IP๎Address
The๎default๎IP๎address๎of๎the๎printer๎is๎192.168.0.141,๎
and๎is๎displ ayed๎when
๎the๎printer๎is๎powered๎on๎for๎the๎
first๎time๎or๎when๎DHCP๎is๎set๎to๎On.
If๎you๎do๎not๎use๎DHCP,๎ask๎your๎network๎administrator๎
for๎the๎IP๎address๎to๎use.
Subnet๎Mask The๎default๎subnet๎mask๎of๎the๎printer๎is๎
255.255.255.0.๎If๎you๎do๎not๎use๎DHCP,๎ask๎your๎
network๎administrator๎for๎the๎subnet๎mask.
Gateway The๎default๎gateway๎of๎the๎printer๎is๎192.168.0.1.๎If๎
you๎do๎not๎use๎DHCP,๎ask๎your๎network๎administrator๎
for๎the๎subnet๎mask.
Effective๎IP The๎IP๎address๎the๎printer๎uses.
IPv6
Adrs๎Config
๏ฌ๏ Auto
๏ฌ๏ Manual
Method๎to๎set๎the๎IP๎address๎if๎the๎network๎uses๎IPv6.
Setting:
IP๎Address The๎printer๎doe s๎not๎have๎an๎default๎IPv6๎IP๎address.๎If๎
Adrs๎Config๎is๎set๎to๎Auto๎and๎the๎printer๎is๎not๎
connected๎to๎a๎network,๎None๎is๎displayed.
Prefix๎Len The๎default๎prefix๎length๎is๎64.
Menu๎Display Settings Function
To Next Page
Loading...
