DataCard SP35

Page 16
The Printer Toolbox displays:
• The current state of communication between the
driver and printer.
• Message text, if there are any messages.
• The current port mode, which can be USB, Shared
Mode, or Directly Networked.
• The printer type.
• The driver and printer firmware version numbers.
Communication automatically resumes when you print a
card, or when you open the Properties or Printing
Preferences dialog box.
Buttons on the Printer Toolbox are grayed out when a
card is ready to print or is printing, when there is a
message, or when the printer is powered off. Fix the
problem or wait until printing is done before printing a
sample card, running a cleaning card, or using advanced
setup.
See SP35 Info Central for more information about the
Printer Toolbox.