Product Manual - DM991 Series V Family - 204.4092.08 28
• Link Speed – it is possible operation velocity on the interface at 100Mbits/s or 10Mbits/s;
• Flow control - allows enabling flow control on the interface. Should it be operating on Full
Duplex mode, pause frames will be used. Should it be on Half Duplex mode, back
pressure mode will be used;
• On pause frames - when there is LAN clogging, the equipment will send pause frames to
the link partner, so that it will wait for a determined time until sending the next data
package;
• On back pressure - when there is LAN clogging, the equipment generates net collisions to
limit traffic.
To Next Page
Loading...
