Datalogic BC9030 User Manual

Selecting the Interface Type
8 BC 9xx0-BT Cradle
Selecting the Interface Type
Upon completing the physical connection between the reader and its host,
scan the appropriate bar code for your system’s correct interface type.
Configuring the Interface
Scan the programming bar code which selects the appropriate interface type
for the system the reader will be connected to.
NOTE
Unlike some other programming features and options, interface selec-
tions require that you scan only one programming bar code label. DO
NOT scan an ENTER/EXIT bar code prior to scanning an interface selec-
tion bar code.
Some interfaces require the scanner to start in the disabled state when
powered up. If additional scanner configuration is desired while in this
state, pull the trigger and hold for 5 seconds. The scanner will change
to a state that allows programming with bar codes.
RS-232
RS-232 standard interface
Select RS232-STD
RS-232 Wincor-Nixdorf
Select RS232-WN
RS-232 for use with OPOS/UPOS/JavaPOS
Select RS-232 OPOS

Datalogic BC9030 Specifications

General

Compatibility	Datalogic handheld scanners
Power Supply	External power supply
Mounting Options	Desk/Wall mounting
Type	Charging cradle
Connectivity Technology	Cable
Host Interface	USB
Interface	USB
Operating Temperature	0 to 40 °C (32 to 104 °F)
Storage Temperature	-20 to 70 °C (-4 to 158 °F)
Humidity	5% to 95% non-condensing
Charging	Cradle/Charger