Installation
2 BC 9xx0-BT Cradle
Installation
To set up your BC9030-BT-BP cradle you must:
1. Physically install the cradle.
2. Make all system connections.
3. Configure the BC9030-BT-BP cradle.
The cradle package contains the following items:
Regulating the Cradle Position
To regulate the position, use the hex key to unscrew the holder and slide it to
the desired position.
• BC9030 BT Presentation Base • Hex Key
• BC9030-BT-BP Quick Reference Guide
(this manual)
• Rubber Spacers
• Metal Mounting Plate
To Next Page
Loading...
