Need help?Do you have a question about the Datalogic BC9030 and is the answer not in the manual?
General| Compatibility | Datalogic handheld scanners |
|---|---|
| Power Supply | External power supply |
| Mounting Options | Desk/Wall mounting |
| Type | Charging cradle |
| Connectivity Technology | Cable |
| Host Interface | USB |
| Interface | USB |
| Operating Temperature | 0 to 40 °C (32 to 104 °F) |
| Storage Temperature | -20 to 70 °C (-4 to 158 °F) |
| Humidity | 5% to 95% non-condensing |
| Charging | Cradle/Charger |
Details the status indicated by the LEDs on the BC9030-BT-BP cradle.
Instructions on adjusting the cradle's angle using a hex key.
Procedure for attaching and detaching the interface cable to the cradle.
Overview of the Datalogic Aladdin utility for configuration.
Describes sending configuration strings via RS-232 or USB-COM.
Using bar codes from the manual to configure the cradle.
Procedure to restore factory default settings using a bar code.
Scanning bar codes to set the correct interface type for the reader.
Options for configuring the RS-232 serial interface.
Options for configuring USB interfaces (COM, OEM, Keyboard).
Programming bar codes for USB Keyboard and Wedge Interfaces.
Information on control character emulation for keyboard interfaces.
Bar code to enter or exit country mode programming.
Sets the country mode to United States.
Sets the country mode to Belgium.
Sets the country mode to Great Britain.
Sets the country mode to Croatia.
Sets the country mode to Czech Republic.
Sets the country mode to Denmark.
Sets the country mode to France.
Sets the country mode to French Canadian.
Sets the country mode to Germany.
Sets the country mode to Hungary.
Sets the country mode to Italy.
Sets the country mode to Japanese 106-key.
Sets the country mode to Lithuanian.
Sets the country mode to Norway.
Sets the country mode to Poland.
Sets the country mode to Portugal.
Sets the country mode to Romania.
Sets the country mode to Spain.
Sets the country mode to Sweden.
Sets the country mode to Slovakia.
Sets the country mode to Switzerland.
Bar code to enter or exit caps lock state programming mode.
Sets the caps lock state to OFF.
Sets the caps lock state to ON.
Enables automatic caps lock behavior.
Bar code to enter or exit numlock state programming mode.
Keeps the numlock key state unchanged.
Toggles the numlock key state.
Details about supply voltage, power consumption, and indicators.
Specifications for Bluetooth protocol and radio frequency.
Details on working temperature, storage, humidity, and protection class.
Specifications for weight and dimensions of the device.
Information on the maximum number of devices per base station.
Details the product warranty period and terms.
Procedure for submitting warranty claims and obtaining service.
Lists conditions under which the warranty does not apply.
Guidelines to minimize ergonomic injury risks during operation.
Access to datasheets, manuals, software, and drawings.
Information on return material authorizations and repair centers.
Details about maintenance agreements and services.
How to obtain technical assistance via email or phone.
To Next Page