EasyManua.ls Logo

Datalogic DL-Axist - Charge the Battery

Datalogic DL-Axist
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Battery
16 DL-Axist™
Replace the Battery
To replace the battery pack, follow the steps below:
1. Turn off the DL-Axist, or put it in Swap Battery mode (see "Swap
Battery" on page 22).
2. Rotate the latches to the open position:
3. Grab the battery cover by the sides and lift it out of the way:
4. Remove the battery by pulling the tab on the bottom of the
battery:
5. Insert the new battery pack into the slot (see “Install the
Battery” on page -9, steps 3 to 6).

Other manuals for Datalogic DL-Axist

Related product manuals