Datalogic Applications
User’s Manual 107
blocks transfer of binary data in the configuration file. Binary data
can be quite large compared to other configuration data, so if
performance is important and the desktop wallpaper file does not
need to be changed remotely for example, the administrator can
clear this check box to make configuration files smaller and quicker
to apply. This check box is selected by default.
f. Custom Home Page
This check box enables a locally hosted web page that can be
displayed on the device when network connectivity fails. Selecting
this check box will set browsers’ error pages to the home page
located in the “Home Page Location” folder location. Clearing this
check box returns browsers to their default error behavior when
they cannot load any particular web page.
g. Home Page Location
This field stores the path to a locally hosted web page that can be
displayed on the device when network connectivity fails. This
functionality is enabled by the “Custom Home Page” check box. This
folder can be located in either internal flash (/storage/sdcard0) or in
a MicroSD card (/storage/sdcard1). The default value is
/storage/sdcard0.
h. Is Authentication Required
This check box enables authentication to launch DXU Agent, and
puts the User Name and Password into operation. When enabled,
the user must correctly type both the user name and password to
gain access to DXU Agent’s settings. This check box is not selected
by default.
Note that these settings are also enforced by the DXU desktop
application when it loads the configuration from the device. The DXU
administrator will be prompted to type this user name and
password. Once authenticated, the DXU administrator can edit the
user name and password in DXU and apply these to devices.
To Next Page
Loading...
Need help?
General
