Datalogic Applications
154 DL-Axist™
7. (Optional) Select the “Silent Install” check box if you wish to
perform a firmware update that does not require user interaction
on the device.
8. (Optional) Select the “Force Update” check box if you wish to
force a complete reinstallation of this image on the device.
9. (Optional) Select an option from the “Reset Type” menu if you
wish to perform a factory data reset after the image update
finishes, or if you wish to perform an enterprise reset after the
image update finishes, or if you just want to have the device
reboot without resetting at all.
10. Click the Update button.
To Next Page
Loading...
