9. CHECKS AND PERIODICAL MAINTENANCE
The following is a list of recommended check and maintenance operations that should be periodically
carried out by qualified personnel.
Check that:
The operating distance and the alignment of the two units conforms to the indications given in section 2
“Installation mode” and section 10 “Technical data”.
The DS2 device and external electrical connections are not damaged.
The frequency of the checks depends on the particular application and operating conditions of the light
grid.
The AREAscan
TM
devices of the DS2 series do not require particular maintenance, with the exception
of the cleaning of the protective surfaces of the optics.
Use a cotton cloth dampened with water for cleaning.
Do not use under any circumstances:
alcohol or solvents
wool cloths of synthetic fabric
Disturbances that generate power supply shifts or lacks can open temporarily the outputs but do not
compromise the functioning of the light grid.
Helpful links at www.datalogic.com: Contact Us, Terms and Conditions, Support.
The warranty period for this product is 36 months. See General Terms and Conditions of Sales for
further details.
To Next Page
Loading...
Need help?
General
