Technical Features
124 Gryphon™ D432/D412Plus
Indicators
Gryphon D432/D412Plus LED Indicators
The Gryphon D432/D412Plus family uses green LED indicators to signal the following reader
functions:
STATUS BEHAVIOR
Power ON
At power-on, the LEDs blink briefly, then light up for
2 seconds to signal the power supply is pres-
ent.
Normal Function The LED lights up after a good decoding and will switch off only at the next trigger press.
Beeper
The Gryphon D432/D412Plus basic software provides beeper signals for good/wrong reading
and for indicating errors. Its tone, volume and duration can be directly configured by using the
codes given in the Gryphon D432/D412Plus Reference Manual available on the website.
The application program can also manage the beeper (User De
fined Beeper) when the reader is
controlled by a Host PC. It is possible to activate the beeper by sending a command from the
Host to the reader via the current communication interface.
Good Read Spot
A green Good-Read Spot will be projected in the field of view when the reading is successful.
To Next Page
Loading...
