Need help?Do you have a question about the Datalogic Gryphon GM4102 and is the answer not in the manual?
General| Type | Handheld bar code reader |
|---|---|
| Sensor type | - |
| Scanner type | 1D |
| Read rate (max) | 325 reads/s |
| Tilt reading angle | -35 - 35 ° |
| Pitch reading angle | -65 - 65 ° |
| Sustainability certificates | RoHS |
| Charging time | 4 h |
| Battery capacity | 2100 mAh |
| Power source type | Battery |
| Number of reads per charge | 50000 |
| Wireless range | 15 m |
| Operating frequency | 910 MHz |
| Standard interfaces | RF Wireless |
| Product color | Green, White |
| International Protection (IP) code | IP52 |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 100 mm |
|---|---|
| Width | 71 mm |
| Height | 181 mm |
| Weight | 246 g |
Instructions on how to set up the base charger/station, including positioning options.
Essential safety guidelines for handling, charging, and storing Lithium-ion battery packs to prevent hazards.
Cautions on charging temperature, authorized supplies, and avoiding hazardous conditions like fire or microwave use.
Shows the reader is active and ready to scan via a steady LED.
Details specific LED and beeper indications that occur only when the reader is in Programming Mode.
Indicates a configuration issue with 3 LED flashes/beeps.
Indicates an issue with the Reader Module, shown by 5 LED flashes/beeps.
Indicates the Base Station has successfully powered up with the Yellow LED on.
Covers charging progress (Red LED), completion (Green LED), and errors (alternating LEDs).
Lists recommended cleaners and disinfectants for Datalogic's Disinfectant-Ready Enclosures.
Procedure for cleaning scanner and base electrical contacts, using isopropyl alcohol and optional brushes.
To Next Page