Using the BC40xx™ Radio Base
Quick Reference Guide 7
Using the BC40xx™ Radio Base
Base LEDs
LEDs on the Gryphon I Base provide information about the
Base’s status, as shown in Figure 6.
Figure 6. Gryphon I Base LEDs
The following table describes the significance of each LED:
A button is available to force device connection via the
Datalogic Aladdin Software tool, and for paging the scan-
ner when bidirectional connection is activated. Refer to
the Gryphon I Product Reference Guide (PRG) for a more
detailed explanation.
LED STATUS
Power on /
Data
Yellow On = Base is powered
Yellow Blinking = Base receives data and
commands from the Host or the Reader.
Charging Red On = the Battery is in progress.
Charge com-
pleted
Green On = the Battery is completely
charged.
Charging +
Charge com-
pleted
Red and Green Blinking together = the
Reader is not correctly placed onto the
Base.
To Next Page
Loading...
