Cleaning Procedure
Quick Reference Guide 37
Cleaning Procedure
Exterior surfaces and scan windows exposed to spills,
smudges or debris accumulation require periodic cleaning
to ensure best performance during scanning operations.
Contacts on the scanner and base should also be cleaned
as needed to ensure a good connection.
Follow the procedures described in this instruction sheet
to keep your Gryphon device in good operating condition.
Common Cleaning Solutions
The cleaners and disinfectants listed below are recom-
mended for use on Datalogic’s Disinfectant-Ready Enclo-
sures:
CAUTION
Be sure to turn off power and unplug the
device from electrical outlet before cleaning.
Cleaners Disinfectants
Formula 409® Glass and surface
cleaner
CaviWipes™
Isopropyl alcohol Clorox® bleach
Dish soap and water Hepacide Quat® II
Windex® Original (Blue) Sani-Cloth®
Virex® II 256
Disinfectants may be harsh on metal con-
tacts. They are recommended for use only
on enclosures.
CAUTION
DO NOT spray or pour cleaner directly onto
the unit.
DO NOT use solutions in their concentrated
form.
DO NOT use aerosols, solvents or abrasives.
DO NOT use paper towels or rough cloths to
clean windows.
To Next Page
Loading...
