Configure the Base Station
Quick Reference Guide 5
Securing the DC Power Cord (Optional)
The DC power cord for the adapter can be secured to the
bottom of the base in order to maximize the mechanical
retention of the cable itself. The routing of the power cord
can be changed to accommodate the base station posi-
tioning: horizontal, stand or wall mounting. The cables can
be looped around to the front of the Base Station, or fed
directly out the back of the Base Station, as shown in Fig-
ure 2 on page 5.
Figure 2. Options for routing the DC cord
Please refer to the arrows depicted on the bottom of the
base when placing the cables, detailed in Figure 3.
Figure 3. Arrows showing routing
To Next Page
Loading...
