Numlock
QUICK REFERENCE GUIDE
17
the PRG for other options, and a listing of standard factory
settings.
Reset Default Settings
NUMLOCK
This option specifies the setting of the Numbers Lock
(Numlock) key while in keyboard wedge interface. This
only applies to alternate key encoding interfaces. It does
not apply to USB keyboard.
★ = default value
NOTE: Factory defaults are based on the interface
type. Be sure your reader is configured for the
correct interface before scanning this label. See
"Selecting the Interface Type" on page 7 for more
information.
NUMLOCK
ENTER/EXIT PROGRAMMING MODE
★ Numlock = Numlock key unchanged
Numlock = Numlock key toggled
To Next Page
Loading...
