Charging the Batteries
12 Gryphon™ I GM4102
3. Carefully lift out the gold contacts circuit, and
remove the battery holder while letting the
white connector pass through the hole in the
battery holder (as shown below).
4. Remove the old battery from its place (if pres-
ent), and insert the new battery in the same
position.
5. Replace the battery holder, plug in the connector
and return the contacts circuit to its previous
location.
6. Insert the cover in the handle and screw it back
into place.
When inserting the new battery into the han-
dle, take care to position the battery and the
connector as shown.
To Next Page
Loading...
