Datalogic Gryphon I GD4132 Quick Reference Guide

Scanning Modes
Quick Reference Guide 11
Flashing — The reader flashes
1
on and off regardless of the
trigger status.
Always On — No trigger pull is required to read a barcode.
Scanning is continually on. If the trigger is pulled, the
reader acts as if it is in Trigger Single Mode. Double Read
Timeout
2
prevents undesired multiple reads while in this
mode.
Object Sense — No trigger pull is required to read a bar
code. Scanning is turned on automatically when an item is
placed in reader’s field of view. If the trigger is pulled, the
reader acts as if it is in Trigger Single mode. Double Read
Timeout
3
prevents undesired multiple reads while in this
mode.
Trigger Object Sense — This mode is similar to Object Sense,
except that a trigger pull is required to activate the
decoder.
Scan Mode = Trigger Single
Scan Mode = Trigger Hold Multiple
Scan Mode = Trigger Pulse Multiple
1. Controlled by Flash On Time and Flash Off Time. Use
the PRG to program these options.
2. Double Read Timeout is programmed using the PRG.
3. Double Read Timeout is programmed using the PRG.

Datalogic Gryphon I GD4132 Specifications

General

Brand	Datalogic
Model	Gryphon I GD4132
Category	Barcode Reader
Language	English