Datalogic Gryphon I GD4132 Quick Reference Guide

Cleaning Procedure
32 Gryphon™ I GD4132
Cleaning Procedure
Exterior surfaces and scan windows exposed to spills,
smudges or debris accumulation require periodic cleaning
to ensure best performance during scanning operations.
Contacts on the scanner and base should also be cleaned
as needed to ensure a good connection.
Follow the procedures described in this instruction sheet
to keep your Gryphon device in good operating condition.
Common Cleaning Solutions
The cleaners and disinfectants listed below are recommended
for use on Datalogic ADC’s Disinfectant-Ready Enclosures:
CAUTION
Be sure to turn off power and unplug the
device from electrical outlet before clean-
ing
Cleaners Disinfectants
Formula 409® Glass and sur-
face cleaner
CaviWipes™
Isopropyl alcohol Clorox® bleach
Dish soap and water Hepacide Quat® II
Windex® Original (Blue) Sani-Cloth®
Virex® II 256
Disinfectants may be harsh on metal con-
tacts. They are recommended for use only
on enclosures.
CAUTION
DO NOT spray or pour cleaner directly onto
the unit.
DO NOT use solutions in their concen-
trated form.
DO NOT use aerosols, solvents or abra-
sives.
DO NOT use paper towels or rough cloths
to clean windows

Datalogic Gryphon I GD4132 Specifications

General

Brand	Datalogic
Model	Gryphon I GD4132
Category	Barcode Reader
Language	English