Datalogic Jet DH60 - Batteries and Maintenance; Charging and Replacing Battery Packs

1 DH60
8
2
2 BATTERIES AND MAINTENANCE
Rechargeable backup batteries and battery packs are shipped
partially charged. Please fully charge the device or battery before
use.
NOTE
Annual replacement of rechargeable battery pack avoids possible
risks or abnormalities and ensures maximum performance.
CAUTION
2.1 CHARGING THE BATTERY PACK
The most direct way to charge a DH60 is to connect the device DC jack to a provided
power supply. Alternatively, the DH60 also be charged by the single slot dock or the
four slot dock.
The battery icon on the Taskbar indicates approximate charge level of the battery
and will indicate a low charge when the DH60 needs to be recharged.
The battery pack autonomy varies according to many factors, such
as the frequency of barcode scanning, RF usage, battery life,
storage, environmental conditions, etc.
NOTE
Don’t insert the wall charger into the DC port when the DH60 is
inserted into the dock.
CAUTION