Datalogic Jet DH60 - Status Indicators; Status Light

1 DH60
34
4
4.5 STATUS INDICATORS
4.5.1 Status Light
The DH60 status light communicates read success and charging status.
STATUS COLOR INDICATES
When scanning
Red
Light is red from the time the user
presses the Scan key (or trigger) until
the bar code is decoded, , until the
scanner times out, or until the user
releases the Scan key (or trigger).
Green
Light changes to green when a good
decode is completed and then remains
lit until the user releases the Scan key
(or trigger).
When charging
Green
Light is solid green once the charging
process has completed (full charge).
Red Light is solid red while charging.
Blinking Red Blinking red indicates a charge fault.