Datalogic Jet DH60 - Stylus Calibration

1 DH60
54
4
4.7.1 Stylus Calibration
You might need to recalibrate the touch screen (i.e. when you attempt to select one
item with the stylus, another item is erroneously selected).
To recalibrate the touch screen, complete the following steps:
1. From the Control Panel main window, double tap Stylus to open the “Stylus
Properties” applet window:
2. Tap ‘Calibration’ to open the Calibration screen. Tap ‘Recalibrate’: