Datalogic Jet DH60 - Bluetooth Manager Device Setup

1 DH60
58
4
4.8.2 Bluetooth® Manager Device Setup
Using the DH60 to connect to another device
To create a Bluetooth® pairing between your device and another device that has
Bluetooth® capabilities, ensure that the two devices are turned on, discoverable, and
within close range.
1. From the control panel main window, double tap the Bluetooth Manager icon to
open the Bluetooth Manager control panel. Tap ‘Connections’:
2. Search for available Bluetooth® devices by tapping the button for the type of
device you want (Printer, Serial or All) or tap Discovery > Discover to skip this
step. The DH60 will search for Bluetooth® devices within range.
If you attempt to set up a connection when the Bluetooth® radio is
disabled, you will receive a message reminding you that the radio is
turned off, and asking if you want to turn it on. Tap Yes if you need to
enable the Bluetooth® radio.
NOTE