Datalogic Jet DH60 - Resetting the DH60

USE AND FUNCTIONING
33
4
4.4.1 Resetting the DH60
There are several reset methods for the DH60:
• a warm boot terminates an unresponsive application and clears the working
RAM, but preserves the file system. The Registry is restored from persistent
memory if available or returned to factory default;
• a cold boot forces all applications to close, completely reinitializing the system. It
clears the working RAM, but the file system is preserved. The Registry is
restored from persistent memory;
• a clean boot restores the DH60 to a clean configuration: both the Registry and
the file system returns to a clean status that conforms to factory default.
Warm Boot
To perform a warm boot, press the reset key on the device front (see GENERAL
VIEW).
Cold Boot
To perform a cold boot, press the yellow modifier key and the reset key
Clean Boot
To perform a clean boot, do the following steps:
1. Start menu > Settings > Control Panel
2. Double-tap the RestoreFactorySettings icon.
3. Tap in the field to set the insertion point, and then type "1234".
4. Tap the "Restore" button.
5. Follow on-screen prompts to complete the clean boot.
Warm Boot
Cold Boot
Clean Boot
Registry
Restored from
flash
Restored from
flash
Clean configuration (no user
config)
File
System
Preserved Preserved Clean Installation (no user files)