Datalogic Magellan 9400i Quick Reference Guide

6 Magellan
TM
9300i and 9400i
Cleaning
Exterior surfaces and scan windows exposed to spills, smudges or debris accumulation
require periodic cleaning to assure best performance during scanning and weighing
operations. Use a clean, lint-free cloth or paper towel dampened with a nonabrasive,
mild, water-based window cleaner to wipe away stains, smudges, fingerprints, spills,
etc. from the scan window and exterior surfaces (Figure 5a).
Figure 5. Cleaning the Scanner
(Models vary)
ac
b
CAUTION
DO NOT spray
cleaners directly
on the scanner!
CAUTION
DO NOT use abrasive cleaning agents or abrasive pads to clean this
product. Harsh chemicals, disinfectants, and cleansers can cause dam-
age which will adversely affect scanning and weighi
ng performance.
Daily, clean the debris chutes between the platter and the outer housing (Figure 5c).
Most items can be cleared from the debris chutes
by carefully running a thin, stiff object
like a credit card along all sides of the weighing surface. If necessary, remove the platter
(Figure 5b) to clean the debris chutes and drip rail.
CSS Option
Figure 6. Customer Service Scanner (CSS)
Coupon
A Customer Service Scanner (CSS) can
be teamed with the system which
enables mobile commerce (see Figure
6). This unit can be positioned sepa-
rately for optimal customer access.
This eliminates the need for an addi-
tional scanner, power supply, outlet,
interface cable, POS port and mounting
hardware. The customer can scan bar
codes from their mobile phone screen
or paper coupons while the cashier
continues to scan regular items in par-
allel.

Datalogic Magellan 9400i Specifications

General

Standard interfaces	USB
Connectivity technology	Wired
Type	Built-in bar code reader
Sensor type	Linear
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black, Grey
Housing material	-
Sustainability certificates	RoHS

Weight and Dimensions

Depth	102 mm
Width	401 mm
Height	130 mm
Weight	- g