Enter/Exit Programming Mode
224
PowerScan™ PD953X/PBT950X/PM950X
Bluetooth Security Mode
This feature enables/disables authentication and encryption of the Blue-
tooth link. Use the feature "Bluetooth PIN Code" on
page 224 to specify the
length and digits in the PIN code used to
authenticate the Bluetooth Link.
Bluetooth Security Mode = Disable
Bluetooth Security Mode = Enable
Changing the security mode setting will unlink the devices. If the Automatic
Configuration Update is set to the default “Enabled” setting, the devices must
only be relinked. If the Automatic Configuration Update is set to “Disabled,”
the Security Mode setting must also be updated in the Base Station using
Aladdin. After the Base Station has been updated, the devices must be
relinked.
Bluetooth PIN Code
After enabling Security Mode (see "Bluetooth Security Mode" on page 224),
specify whether you want to set a 4-digit or a 16-digit PIN Code. See
page 304 for detailed information and examples for setting this feature.
Select 4-character Bluetooth PIN Code
DEFAULT
Select 16-character Bluetooth PIN Code
Select PIN Code Length
To Next Page
Loading...
Need help?
General
