Datalogic PowerScan PBT950X

Enter/Exit Programming Mode
Product Reference Guide 261
Interkey Timeout
The 16-key keypad is organized like a cell phone, with multi-tap access to
alpha characters on numeric keys. In alphabetic mode (entered by toggling
the SHIFT key), the keys must be pressed once, twice, or more to obtain the
desired letter.
This command allows you to specify the time which occurs between a key
pre
ss, and the confirmation of the letter by the scanner (when in alpha
mode). The timeout can be configured in increments of 0.5 second.
$CPWNT00\r
0.5 seconds
DEFAULT
$CPWNT01\r
1.0 seconds
$CPWNT02\r
1.5 seconds
$CPWNT03\r
2.0 seconds