Datalogic PowerScan PD9630-SR User Manual (English)

Other manuals for Datalogic PowerScan PD9630-SR

Questions and Answers:

V
vmatthewsAug 14, 2025
What to do if Datalogic PowerScan PD9630-SR Barcode Reader LED is on but barcode does not decode?
- P
  Paul FryeAug 14, 2025
  If the LED is on but the Datalogic Barcode Reader isn't decoding, consider these possibilities: * The reader might not be programmed for the bar code type you're scanning. Ensure it's properly programmed. * The bar code label could be damaged or unreadable. Check the label's condition and try scanning a different bar code. * The distance between the reader and the bar code might be incorrect. Adjust the distance by moving the reader closer or further away from the bar code.
G
gwagnerAug 17, 2025
How to fix Datalogic PowerScan PD9630-SR Barcode Reader when barcode is decoded but not transmitted to the host?
- P
  powersbrandonAug 17, 2025
  If the Datalogic Barcode Reader decodes the barcode but doesn't transmit it to the host, the reader might not be programmed for the correct host type. You should scan the appropriate host type bar code.
T
Tabitha GarzaAug 20, 2025
What to do if Datalogic PowerScan PD9630-SR Barcode Reader LED is on but barcode doesn't decode?
- E
  Emily McneilAug 20, 2025
  If the LED is on, but the bar code doesn't decode, it could be due to several reasons: * The reader might not be programmed for the correct bar code type. In this case, ensure the reader is programmed to read the type of bar code scanned. * The bar code label may be unreadable. Check the label to ensure it is not defaced. You can also try scanning another bar code type. * The distance between the reader and the bar code might be incorrect. Try moving the reader closer to or further from the bar code.
S
Sherry SavageAug 25, 2025
Why Datalogic Barcode Reader does nothing when I pull the scan button?
- A
  Austin KelleyAug 25, 2025
  If nothing happens when you pull the scan button on your Datalogic Barcode Reader, the issue might be due to: * No power to the reader. Check the system power and ensure the power supply is connected. * Loose interface or power cables. Make sure all cable connections are secure.
E
Erik MartinAug 27, 2025
What to do if Datalogic Barcode Reader LED is on but barcode won't decode?
- P
  Phillip RiveraAug 27, 2025
  If the LED is on but the barcode doesn't decode, it could be due to several reasons: * The reader might not be programmed for the correct barcode type. Ensure the reader is programmed to read the type of barcode you are scanning. * The barcode label may be unreadable. Check the label to ensure it is not damaged. You can also try scanning another barcode. * The distance between the reader and the barcode might be incorrect. Try moving the reader closer to or further away from the barcode.
L
lopezshelleyAug 30, 2025
Why Datalogic Barcode Reader doesn't work when I pull the scan button?
- K
  kathleen52Aug 30, 2025
  If nothing happens when you pull the scan button on your Datalogic Barcode Reader, it could be due to the following reasons: * There may be no power to the reader. Check the system power and ensure the power supply is connected. * The interface or power cables might be loose. Ensure all cable connections are secure.
C
Cindy TorresSep 3, 2025
Why nothing happens when I pull the scan button on my Datalogic PowerScan PD9630-SR Barcode Reader?
- E
  Eric LambSep 3, 2025
  If nothing happens when you pull the scan button on your Datalogic Barcode Reader, check the following: * Ensure the system has power and the power supply is correctly connected. * Make sure all cable connections are secure, as loose interface or power cables can cause this issue.
J
Jennifer MooreSep 6, 2025
How to fix Datalogic PowerScan PD9630-SR that decodes but doesn't transmit to host?
- A
  Amy ChavezSep 6, 2025
  If the bar code is decoded but not transmitted to the host, the Datalogic Barcode Reader may not be programmed for the correct host type. To resolve this, scan the appropriate host type bar code.
M
Molly FriedmanSep 9, 2025
What to do if Datalogic Barcode Reader decodes but doesn't transmit to the host?
- J
  Jared JacksonSep 9, 2025
  If the barcode is decoded but not transmitted to the host, the reader might not be programmed for the correct host type. Scan the appropriate host type barcode to resolve this.

Datalogic PowerScan PD9630-SR Specifications

General

Scanning Technology	Laser
Scan Rate	100 scans per second
Ambient Light Immunity	100, 000 Lux
IP Rating	IP65
Light Source	Laser Diode
Interface	USB, RS-232
Resolution	0.1 mm
Operating Temperature	-20°C to 50°C
Storage Temperature	-40°C to 70°C
Decode Capability	1D, 2D
Power Supply	5V DC
Humidity	5% to 95% (non-condensing)
Type	Handheld Barcode Scanner