Datalogic PowerScan PM9501-AR Series

Set Date and Time
Quick Reference Guide 7
Compatibility with the PowerScan™ 8000
family
The PM9501-AR can be programmed to operate in a mode
compatible with the PowerScan 8000 family. For further
details and for the relevant configuration strings and
labels, refer to the PRG.
Set Date and Time
1. Scan the Enter/Exit Programming bar code below to
set date and time.
ENTER/EXIT PROGRAMMING MODE
2. Scan the Set Date bar code + six digits for Year,
Month and Day (YYMMDD) from the Hex-Numeric
Keypad on page 27.
Set Date
3. Scan Set Time + six digits for Hours, Minutes and
Seconds (HHMMSS) from the Hex-Numeric Keypad
on page 27.
Set Time
4. Scan the Enter/Exit Programming bar code to com-
plete.