Datalogic PowerScan PM9501-AR Series

Error Codes
18 PowerScan™ PM9501-AR
Error Codes
Upon startup, if the reader sounds a long tone, this means
the reader has not passed its automatic Selftest and has
entered FRU (Field Replaceable Unit) isolation mode. If the
reader is reset, the sequence will be repeated. Press and
release the trigger to hear the FRU indication code.
The following table describes the LED flashes/beep codes
associated with an error found.
Number of
LED
Flashes/
Beeps
Error Corrective Action
1Configuration
Contact Helpdesk for
assistance
2Interface PCB
6 Digital PCB
11 Imager