Datalogic QuickScan i QD2100 Product Reference Guide

Label ID
Product Reference Guide 95
Label ID
A Label ID is a customizable code of up to three ASCII characters (each can be one of
hex 0x01-0xFF), used to identify a barcode (symbology) type. It can be appended previ-
ous to or following the transmitted barcode data depending upon how this option is en-
abled. This feature provides options for configuring custom Label IDs as a pre-loaded set
(see
Label ID: Pre-loaded Sets on page 95) or individually per symbology (see Label
ID: Set Individually Per Symbology on page 98
). If you wish to program the reader to
always include an industry standard label identifier for ALL symbology types, see the pre-
vious feature Global AIM ID on page 92.
Label ID: Pre-loaded Sets
The reader supports two pre-loaded sets of Label IDs. Table 17 shows the default set and
alternate set.
CAUTION
When changing from one Label ID set to another, all other reader configura-
tion settings, including the host interface type, will be erased and set to the
standard factory defaults. Any customized configuration will be lost.
ENTER/EXIT PROGRAMMING MODE
Label ID Pre-loaded Set = Return to Default Set
Label ID Pre-loaded Set = Alternate Set
DEFAULT

Datalogic QuickScan i QD2100 Specifications

General

Scan speed	8 sec/page
Wavelength	610 nm
Tilt angle range	-65 - 65 °
Decoding standards	1D / GS1 DataBar China Post GS1 DataBar Expanded/ Stacked/ Stacked Omnidirectional
Dimensions (WxDxH)	170 x 66 x 71 mm
Standard interfaces	RS-232, USB, Keyboard wedge
Input voltage	5 V
Power consumption	340 mA
Product color	White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	121.9 g