Datalogic QuickScan i QD2100 - Code 5 Check Character Transmission; Code 5 Hex to Decimal Conversion

Code 5
Product Reference Guide 261
Code 5 — cont.
Code 5 Check Character Transmission
This feature enables/disables transmission of an optional Code 5 check character.
Code 5 Hex to Decimal Conversion
This feature enables/disables the conversion of hexidecimal label data to decimal label da-
ta.
ENTER/EXIT PROGRAMMING MODE
Code 5 Check Character Transmission = Don’t Send
Code 5 Check Character Transmission = Send
DEFAULT
ENTER/EXIT PROGRAMMING MODE
Code 5 Hex to Decimal Conversion = Disable
Code 5 Hex to Decimal Conversion = Enable
DEFAULT