Datalogic QuickScan i QD2100 - Standard 2 of 5 Check Character Calculation; Standard 2 of 5 Check Character Transmission

Standard 2 of 5
Product Reference Guide 247
Standard 2 of 5 — cont.
Standard 2 of 5 Check Character Calculation
This option enables/disables calculation and verification of an optional Standard 2 of 5
check character.
Standard 2 of 5 Check Character Transmission
This feature enables/disables transmission of an optional Standard 2 of 5 check character.
ENTER/EXIT PROGRAMMING MODE
Standard 2 of 5 Check Character Calculation = Disable
Standard 2 of 5 Check Character Calculation = Enable
DEFAULT
ENTER/EXIT PROGRAMMING MODE
Standard 2 of 5 Check Character Transmission = Don’t Send
Standard 2 of 5 Check Character Transmission = Send
DEFAULT