EasyManuals Logo

Datalogic Touch 90 pro Quick Reference

Datalogic Touch 90 pro
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
PATENTS
This product is licensed
under one or more of the following
U.S. patents:
4,894,523; 5,021,642; and 6,158,661
This product is covered
by one or more of the following patents:
U.S. patents 5,917,176; 5,992,740; 6,010,073; 6,305,606 B1;
6,517,003 B2; and 6,712,271 B2
European patents 829,814 B1; 851,378 B1; and 895,175 B1
Additional patents pending.
FCC COMPLIANCE
This device complies with PART 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference which
may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
WEDGE
With the Wedge or PC Notebook cables, this accessory device
is intended to be connected to either a UL Listed Computer
which supplies power directly to the reader or a UL Listed
Direct Plug-in Power Unit marked “Class 2”, rated 5 V,
minimum 150 mA.
DISCONNECTING THE CABLE

Other manuals for Datalogic Touch 90 pro

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic Touch 90 pro and is the answer not in the manual?

Datalogic Touch 90 pro Specifications

General IconGeneral
Scan speed256 sec/page
Decoding standards2/5 family, Code 39, Code 32, Code CIP 39, Code 128, EAN128, EAN/UPC, ISBN/ISSN, CODABAR, Code 93, ISBT128, MSI, Plessey, Telepen, Delta IBM, Code 11, Code 49, Code 16K, GS1 Databar
Standard interfacesUSB, RS-232
Input voltage5 V
Power consumption150 mA
Dimensions (WxDxH)175 x 100 x 80 mm
Weight and Dimensions IconWeight and Dimensions
Weight195 g

Related product manuals